Electromagnetic Flow meter

Product Description

Introduction are leading manufacture for Electromagnetic flowmeter in process control instrumentation, Maintenance free low cost, highlystable reliable & ideal flow meter suitable for wide ranges of liquid flowmeasurements the flow meter with low pressure. The measurement being based on'Faraday™s law of electromagnetic induction™ is independent of viscosity,density, pressure and temperature of the flowing media & measurement is atrue volumetric flow measurement. Standard current output of 4 “ 20 mA DC isprovided which is directly proportional to the instantaneous volumetric flowrate.

 1)   Advantages of Meter:

1.    2.    3.    4.    Disadvantages of Meter:

1.    2.    In order to use a magnetic flow meter for measurement of a liquid's flowrate, that liquid must be conductive.

Primary Flow Tube Specifications

Media Pressure -    20kg/cm², 25 kg/cm

Media Temperature       - PTFE LINER, Hard Rubber LINER

Ambient Temp               -0 “ 60 C

Materials                      - Pipe “ SS 304 [non magnetic & withoutpaint]

                                        Electrodes “ SS 316/SS 316L/hasalloy C  

                                       Inner lining “ PTFE / Hard rubber

                                      Coil Housing “ CS (Polyurethane Painted) 

4-20 mA Transmitter Specifications 

Type                 - Integral / Remote Mounting

Enclosure         - Aluminum Die-cast - for Amplifier / Transmitter

Dimensions      - Head Mount:      100 mm (L) x 160 mm (W) x 80 mm (D)

                  - Remote Mount:  100 mm (L) x160 mm (W) x 80 mm (D)

Cable Entries    - 3 nos. for remote / integral Transmitter

Cable Glands     - PG-7 [Standard]

Power Supply    - 110 V / 220 V AC 50 Hz S.P. ± 10 %

Temperature     - 0 “ 50 C (Operating Ambient)

Input                - Micro-volt signal proportional to flow rate from Flow Tube

Outputs            - 4 “ 20 mA dc in max. 110 Ohms “ Proportional (0 “ 100 % flow rate)

Flow Range       - m³/hr, LPH, LPM & LPS

Totalize Range - Lit & m³

Min. Media        - 10 µSiemens / cm (Conductivity)

Local Display    - 4 Digit 7 Segment LED Display (with unit indications)

                            8 Digit 7 Segment LEDDisplay for Totalized quantity (with unit indication)

Accuracy           - ± 1% (10 % to 90 % of calibrated range in ref. conditions)

Repeatability    - ± 0.2 % of reading

Protection         - IP “ 65 Equivalent